new web: http://bdml.stanford.edu/pmwiki
TWiki >
RisePrivate Web>PrivateRiSE > PapersInProgress>MicroWedgesOnDPSBacking (08 Oct 2008, BarrettHeyneman)
RisePrivate Web>PrivateRiSE > PapersInProgress>MicroWedgesOnDPSBacking (08 Oct 2008, BarrettHeyneman) Table of how the spinner speed affects the TAP Blue backing layer thickness.
NOTE: this is for un-thinned TAP Blue.
A layer of microwedges was bonded to the top of the DPS by dipping the tips of the DPS in silicone then just dropping them on the back of the microwedges, so that only the very tips are stuck there.
-- AlanAsbeck - 12 Sep 2008
| RPM | Backing layer thickness [um] |
|---|---|
| 1400 | ~150um (Minimum!) |
| 1200 | ~200um |
| 900 | ~275um -- Sweet spot for thinnest possible while still pulling out of mold |
| 600 | ~400um -- Probably sweet spot for making hierarchical structures |
| <600 | FAT |
- MicroWedgesOnDPSBacking.zip: Zip file with a bunch of pictures of it sticking to stuff
- MicroWedgesOnDPS_divx.avi: Video (
DivX) of it sticking to different stuff
Copyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback