From:      ylpark@stanford.edu
   Subject:    Re: Strain Gage
   Date:    August 30, 2005 2:32:31 PM PDT
   To:      aaron@bostondynamics.com
   Cc:      cutkosky@stanford.edu
Aaron,

This is the strain gage I used for the recent load cell fabrication.

  • Manufacturer: Micron Instruments (http://www.microninstruments.com)
  • Part Numver: SS-060-033-1000PB
  • Width: .008 in
  • Thickness: .0004 in
  • Resistance Ohms @ 78F: 1050 75
  • Gage Factor: 155 10
  • Maximum strain: 3000 microinch/inch (3 percent)
  • TCGF: -18%
  • TCR: 24%

The dimensions appear above do not include those of the back pad. The dimensions of the back pad appear in the following page:

http://www.microninstruments.com/products/gages/backedgage.htm

Please, let me know if there is anything else I can answer.

Yong-Lae Park

 
This site is powered by the TWiki collaboration platformCopyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback