new web: http://bdml.stanford.edu/pmwiki
TWiki >
Manufacturing Web>ManufacturingHome > SDMFabTechniques > SpineFabrication>SqueezingPrototypes (31 Jul 2010, DanAukes)
Manufacturing Web>ManufacturingHome > SDMFabTechniques > SpineFabrication>SqueezingPrototypes (31 Jul 2010, DanAukes) -- MicheleLanzetta? - 09 Jul 2004
Pins are curved to prevent rotation. By sliding the tube towards the wall the pins exhert an Internal force. Can be used in Horizontal and Vertical configuration (see SqueezingOptions). An additional claw for stability is missing.
Curved pins here have been inserted in a piece of 35A Urethane. The support material has been conformed to have the required squeezing force by just pushing towards the wall. Can be used in Horizontal and Vertical configuration (see SqueezingOptions). An array of pins is supposed to be built for stability.
(Out of focus, sorry, 1st experience with the lab camera)
Pins are curved to prevent rotation. By sliding the tube towards the wall the pins exhert an Internal force. Can be used in Horizontal and Vertical configuration (see SqueezingOptions). An additional claw for stability is missing.
Curved pins here have been inserted in a piece of 35A Urethane. The support material has been conformed to have the required squeezing force by just pushing towards the wall. Can be used in Horizontal and Vertical configuration (see SqueezingOptions). An array of pins is supposed to be built for stability.(Out of focus, sorry, 1st experience with the lab camera)
Copyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback