Resistance of Conductive Polymers Table

March 17, 2008. We created 1 x 2 inch urethane blanks, then created a 2 x 2 mm groove on top, to be filled with various types of conductive polymers. We want to use them either as conductive paths to replace wiring or as a "seed" in which to electrodeposit.

Name	Resistance
Conductive Epoxy (from Physics Store)	0.8
Nickel print (from Physics Store)	4
Nickel Epoxy (from Epoxies etc)	No reading
Nickel Epoxy Sample 2 (from Epoxies etc)	No reading
Silver Epoxy (from Epoxies etc)	4.5
Silver Epoxy Sample 2(from Epoxies etc)	Variable
Silver Print (from Physics Store)	0.5
Silver Print Sample 2(from Physics Store)	1.9

Next step is to either electroplate or laser etch the blanks and test efficacy -- SamsonPhan - 18 Mar 2008